3/4” FPT 3 Way Side Load Ball Valve Polypropylene with Mounts SEWER This unit offers a beefy

This unit offers a beefy base and a Honda muffler

to allow you to switch from your surface cleaner to the gun/wand assembly without running back and forth to your engine to shut it down to release the pressure in the hose

Choose this hose for the 7 GPM 12-volt pump

2 x 100' grey 1 wire hoses with quick connects and a 50’ 1/2” ID high pressure hose with one end 1/2” mpt (direct install to hose reel) and the other end 3/8” mpt

Activates at 435 psi

3/4” FPT 3 Way Side Load Ball Valve Polypropylene with Mounts SEWER This unit offers a beefy3 Way Banjo bolted ball valve: Side load with two mounts Polypropylene (use liquid Teflon, not Teflon tape when installing fittings) Do not use Teflon tape. Using too much Teflon tape will damage or crack the brand new valve. Use our SCH 80 PVC hose barbs available in just about every size and configuration to connect this ball valve to our in stock non collapsible hose, Flex Tech RT or large assortment of chemical hose sold by the foot. Please do not